Connect Menu

follow

Thursday, May 9, 2013

Styled Office Bookshelves


As part of staging our home for showings and to do some early packing, I decided to style the bookshelves in the Office (used to be dining room).

We were able to box up all almost all of Eric's books for the move and I arranged the bookshelves with cookbooks, a few of Eric's books that he was using frequently and decor items we had on hand. I wasn't quite ready to pack the cookbooks yet since we were still making meals and coming up with meal plans so I thought I might need them. Although in reality I probably could have paired it down to a couple but I did need something to decorate the shelves with too :)



The key was putting items at various places on the shelves and having varying heights - not having it be consistent or uniform. So on one shelf having books vertical to the left with a decor item on the right and then on a different shelf having books stacked horizontal in the middle with a decor item on top of them, etc. And clustering decor items together. I am by no means an expert at this but I think they turned out quite nicely considering I didn't buy anything new.

Here is what they looked like before. They were of course much more packed but they needed to hold all of Eric's books to be functional.



Here is another shot of the office as a whole with the updated bookshelves. It's really the first thing prospective buyers saw when walking in the front door (it's also where the house flyers were kept on his desk) so I think this was a good decision on our part. Ideally the big monitor wouldn't be there but again we still had to keep some functionality for Eric while we were trying to sell.

 
Have you been doing any styling of shelves lately? Any other tips to share? I shared some great examples here.


Wednesday, May 1, 2013

What I Wore


I love that wearing multiple colors is in style again because I love bold and bright colors. Just like this magenta and blue combo.

It was a Friday after a long week. The week before Spring Break (oh how I miss having a Spring Break) and Easter so no one was in the office. I was planning to work from home until we got a 2 hour long showing notice that morning and I needed to go into the office to work. Since no one was around I decided to just wear jeans in even though they are not considered business casual attire at my company. I know... I'm such a rebel.

That night we went to the Old Mecklenburg brewery with friends to hang out and watch some March Madness basketball.




Jeans: Old Navy Rockstar Super Skinny
Magenta Sweater: Banana Republic Outlet, similar
Bright Blue scarf: shop in London
Black Boots: Andrew Gellar
Black Jacket: Loft Outlet
Earrings: multicolored seed bead circle earrings made by me

Linking Up With: What I Wore Wednesday, Pinterest Told Me To

Tuesday, April 30, 2013

DIY Nursing Cover


I'm sure you must have thought I'd given up crafts and DIY projects but I promise I haven't! It's been a little crazy with the house stuff and I had been working on some crafts I couldn't share until they were gifted. This is one of those.

I decided to try my hand at making a nursing cover for a pregnant friend as part of her baby shower gift. It seemed simple enough minus the boning which I had not worked with before and I found 2 great tutorials that I kind of meshed together to take the best of both based on the comments/feedback. I mainly followed the Prudent Baby one but made some changes based on the Made By The MamaMonster one and both tutorials comments. They both have more step by step photos to help you out when you get to certain parts.



Materials:
- 26″ x 38″ for the cover
- 25″x 3″ for one side of the strap
- 10″ x 3″ for the other side of the strap
- 15 inches of boning
- 2  1-inch D rings

I washed and dried my fabric before starting this project since I knew it was something that might get thrown in the wash frequently and didn't want there to be any shrinking after I made it.

Cut your fabric pieces.

Fold the strap pieces in half lengthwise (hot dog style) right sides together. Pin and sew together with a 1/4 inch seam for the shorter strap.  Do the same for the longer strap but when you get about 3 inches away from the end sew in a curve toward the folded corner (like this photo below from MamaMonster). This is so the d ring won't come loose when it is pulled on.


Trim the curved seam and turn both strap pieces inside out. This will take some patience. Iron flat with the seam in the middle.

Then take one edge of the short strap and fold it over 1/4" and iron. Insert your d rings and fold fabric again over top of the d ring and pin. Sew in place with a strong stitch or a few lines of stitching.

On the bottom edge of your cover fabric piece, fold 1/2" and iron and then another 1/2" and iron. Sew using a straight stitch at 1/4" seam allowance. On the two perpendicular shorter side do the same thing.

Fold the top edge over 1/2" and iron. Then another 1" and iron. Sick of ironing yet?

Find the center of the top edge and measure 6 1/2" in both directions and pin. To make the casing for your boning, sew a straight stitch between your two pins. Feed in the boning with the curve out to the right side of your fabric- it should hang out about an inch on each side.

Pin as best as you can in place and sew a few stitches at the center to secure it from sliding. Any time my needle was going through the boning I walked my presser foot since it was pretty thick and I didn't want to break a needle.

Here is the trickiest part. Insert the straps right side up underneath that one inch of boning that was sticking out on each side of your finished casing. The biggest feedback on the nursing cover was that the boning falls down so to prevent that you have to sew your straps into the boning. Then fold them up over the boning and hem so that you now see the seam side of your straps. If you accidentally do it on the wrong side you will kick yourself for having to rip out a bunch and start this tricky part over! Pin really well and sew with a straight stitch that forms a box for extra strength (like the photo below from Prudent Baby). Again I walked my presser foot using the hand crank when going through the boning.

Lastly, sew the remainder of the top seam in place from where you stopped previously at the 6 1/2" inch marks to the edges.

Oh and if you want you can add a pocket to the back to be used for nursing pads or a burp cloth or whatev. I just guesstimated on where to put it.. its about 1/4 of the way in from the edge and near the bottom and about 5" x 5".

Ta-da!




Since I don't have a baby and thought it might be creepy to ask to borrow one for nursing cover photos...

I present.... Baby Tiger. Yep it's a stuffed tiger just in case you thought it was the real deal. What true Clemson fan doesn't have a tiger?



The soon to be mom loved her nursing cover! I have asked for feedback from her after she uses it for awhile for any improvements needed whenever I make another one.

Friday, April 26, 2013

Closing Time


Today's the day! We are closing on our new home! I will definitely do some new house reveal posts and sneak peaks eventually because we aren't moving just yet. We are so excited for the place to be ours... seems like we started the house buying and selling journey a long time ago even though it was just October.

I will leave you with a picture I took in October of our design selections for our kitchen. It's crazy to think that you pick out selections on small swatches/pieces of that item without being able to see it on a large scale or know how all the pieces really look together until it's done. Of course there is a design person to help you if you want but still it is A LOT of decision to make all in one day.




So that phone picture was all I had for what our kitchen design choices would look like until it was all installed recently. And we are just thrilled with how it turned out... apparently we are awesome designers :)  Can't wait to show y'all soon!
Related Posts Plugin for WordPress, Blogger...